KLS conveyor with carriage and winch tensioning device
KLS conveyor with take-up by gravity
Fixed belt conveyors of general purpose with belt width from 400 up to 1400 mm are intended for application in different branches of industry for handling of coal, cement, building materials, grain, bulk cargo and so on. Rollers with the diameter from 89 to 159 mm applied to them correspond to this function as well. Conveyors used under severe, dusty and humid conditions are completed with double contact seal rollers, belt-cleaning rollers and rubber-coated rollers.
At customer’s demand, conveyors can be delivered with a tripper and a diagonal plough. If it is necessary, conveyors are also equipped with a control system, which allows to automatize loading of the materials in the container system situated under the conveyor in accordance with a set programme.
The conveyors manufactured by the plant are completely adapted to customer’s conditions and have a design for light, average and severe work.
Drive power of the conveyor: from 4 up to 2õ315 kW.
Belt speed: from 0,8 up to 4 m/sec.
At customer’s demand, conveyors are equipped with a rigid floor; rigid suspended structures and rope suspended or rope floor structures. Depending on the conveyor application and parameters we use flat one-roller idlers, through two- and three-roller idlers to support load and return belts.
Conveyors are manufactured according to custom design and specific customer conditions.
Conveyors can comprise an equipment set for operation optimization to prevent overloads, to minimize idle time, to forecast fire breaking-out and for emergency protection.